Special Bellow sealed Valves 2018-05-10T12:20:29+00:00

uro-cloro-240x300

Special “Chlorine” Bellow Seal Valve

TECHNICAL DATA

  • Valve Designed to BS – 1873/EUROCHLOR
  • Valve Tested to API – 598/BS – 5146
  • Flanged Ends as per ANSI –B-16.5
  • Face to Face as per ANSI – B – 16.10.

ACCESSORIES

  • Pneumatic Actuators
  • Electric Actuators
  • Floor Columns
  • By Pass Piping

NOTES

  • Optional Stellited Plug & Seat
  • Optional Helium Leakage Test

Bill Of Material

Sr.No Parts Material
1. BODY A-352 Gr.LCB/LCC
2. SEAT RING MONEL / AISI-316/ HASTELLOY-C
3. PLUG MONEL / AISI-316/ HASTELLOY-C
4. STEM MONEL/HASTELLOY-C
5. GASKET SPIRAL WOUND (MONEL + PTFE)
6. BELLOW HASTELLOY-C-276
7. BELLOWCOLLAR HASTELLOY-C
8. BONNET A-352 Gr LCB/LCC
9. FASTENERS A-193 GrB8/A-194 Gr.8
10. STUFFING BOX HASTELLOY-C-276
11. GLAND PACKING PTFE
12. GLAND BUSH HASTELLOY-C-276
13. GLAND FLANGE AISI-304/316
14. YOKE SLEEVE Ni.RESISIT
15. HAND WHEEL C.S. FABRICATED
16. STEM NUT MONEL / AISI-316/HASTELLOY-C
17. PILLAR AISI-304/316
18. GUIDE PLATE AISI-304/316
19. YOKE A-352 Gr.LCB/LCC
20. BEARING STD.

Dimensions:

VALVE SIZES (INCH) 15 20 25 40 50 65 80 100 150 200 250 300 350 400
FACE TO FACE 150# 108 118 127 165 203 216 241 292 406 495 622 699 787 914
300# 153 178 203 229 267 292 318 356 445 559 622 711 838 965
FLANGE DIA. 150# 89 98 108 127 152 178 191 229 279 343 406 483 533 597
300# 92 118 124 156 165 191 210 254 318 381 446 521 584 648
RAISED FACE DIA 150# 35 43 51 73 92 105 127 157 216 270 324 381 413 470
300# 35 43 51 73 92 105 127 157 216 270 324 382 413 470
FLANGE PCD 150# 60 70 79 98 121 140 152 191 241 298 362 432 476 540
300# 67 83 89 114 127 149 168 200 270 330 387 451 514 572
FLANGE THK. 150# 11 13 14 18 19 22 24 24 25 29 30 32 35 67
300# 14 16 18 21 22 25 29 32 37 41 48 51 54 57
RAISED FACE THK. 150# 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6
300# 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6
N0. OF HOLES/DIA 150# 4/16 4/16 4/16 4/16 4/19 4/19 4/19 8/19 8/22 8/22 12/25 12/25 12/29 16/29
300# 4/16 4/19 4/19 4/22 8/19 8/22 8/22 8/22 12/22 12/25 16/29 16/32 20/32 20/32

Test Pressure

Test Pressure 150# 300#
Body (Hyd) 32 kg/cm2 76 kg/cm2
Seat  (Hyd) 25 kg/cm2 55 kg/cm2
Seat  (Air) 07 kg/cm2 07 kg/cm2

angle-type-bsgbv-240x300

” Angle Type “ Bellow Seal Globe Valve

Technical Data

  • Valve Designed to DS-1873
  • Valve Tested to API – 598/BS – 5146
  • Flanged Ends as per ANSI-B-16.5
  • Face to Face as per Mfrs std

Accessories

  • Pneumatic Actuators
  • Electric Actuators
  • Floor Columns
  • By-Pass Piping

Notes

  • Sizes above 250mm has two Piece Bonnet
  • Optional Stellited Plug & Seat
  • Alternate Bellow Material : HC-276/MONEL-400/ INCONEL/625

Bill Of Material

Sr. No. PARTS MATERIAL
1. BODY A-216 Gr.WCB/A351 Gr.CF8/CF8M
2. SEAT RING AISI-410/304/316
3. PLUG AISI-410/304/316
4. STEM AISI-410/304/316
5. GASKET SPW.SS-304 + GRAPHOIL
6. BONNET A-216 Gr.WCB / A351 Gr.CF8/CF8M
7. FASTENERS A193-B7, A194-24/Gr.B8-Gr.8
8. CYLINDER A-216 Gr.WCB/351 Gr.CF8/CF8M
9. GLAND PACKING GRAPHOIL/PTFE
10. GLAND BUSH AISI-410/304/316
11. GLAND FLANGE C.S./AISI-304/316
12. EYE BOLT & NUT C.S./AISI-304/316
13. YOKE SLEEVE Ni.RESIST
14. HAND WHEEL C.S. FABRICATED
15. BELLOW AISI-321/316Ti/316L
16. TOP COLLAR AISI-316
17. BOTTOM COLLAR AISI-316
18. STEM NUT AISI-304/316

Dimensions:

Valve sizes (inch) 15 20 25 40 50 65 80 100 150 200 250 300 350 400
FLANGE DIA. 150# 89 98 108 127 152 178 191 229 279 343 406 483 533 597
300# 92 118 124 156 165 191 210 254 318 381 445 521 584 648
RAISED FACE DIA. 150# 35 43 51 73 92 105 127 157 216 270 324 381 413 470
300# 35 43 51 73 92 105 127 157 216 270 324 382 413 470
FLANGE PCD. 150# 60 70 79 98 121 140 152 191 241 298 362 432 476 540
300# 67 83 89 114 127 149 168 200 270 330 387 451 514 572
FLANGE THK.. 150# 11 13 14 18 19 22 24 24 25 29 30 32 35 67
300# 14 16 18 21 22 25 29 32 37 41 48 51 54 57
RAISED FACE THK 150# 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 16 1,6 1,6
300# 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 16 1,6 1,6
No. OF HOLES/DIA. 150# 4/16 4/16 4/16 4/16 4/19 4/19 4/19 8/19 8/22 8/22 12/25 12/25 12/29 16/29
300# 4/16 4/19 4/19 4/22 8/19 8/22 8/22 8/22 12/22 12/25 16/29 16/32 20/32 20/32
Test Pressure 150# 300#
Body (Hyd) 32 kg/cm2 76 kg/cm2
Seat  (Hyd) 25 kg/cm2 55 kg/cm2
Seat  (Air) 07 kg/cm2 07 kg/cm2

bs-fbv-240x300”Flush Bottom” Bellow Seal Globe

Technical Data

  • Valve Designed to BS-1873
  • Valve Tested to API – 598/BS – 5146
  • Flanged Ends as per ANSI-B-16.5
  • Face to Face as per Mfrs std

Accessories

  • Pneumatic Actuators
  • Electric Actuators
  • Floor Columns
  • By-Pass Piping

Notes

  • Sizes above 250mm has two Piece Bonnet
  • Optional Stellited Plug & Seat
  • Alternate Bellow Material : HC-276/MONEL-400/ INCONEL-600/625

Bill Of Material 

 

Sr. No. PARTS MATERIAL
1. BODY A-216 Gr.WCB/A351 Gr.CF8/CF8M
2. SEAT RING AISI-410/304/316
3. PLUG AISI-410/304/316
4. STEM AISI-410/304/316
5. GASKET SPW.SS-304 + GRAPHOIL
6. BONNET A-216 Gr.WCB / A351 Gr.CF8/CF8M
7. FASTENERS A193-B7, A194-24/Gr.B8-Gr.8
8. CYLINDER A-216 Gr.WCB/351 Gr.CF8/CF8M
9. GLAND PACKING GRAPHOIL/PTFE
10. GLAND BUSH AISI-410/304/316
11. GLAND FLANGE C.S./AISI-304/316
12. EYE BOLT & NUT C.S./AISI-304/316
13. YOKE SLEEVE Ni.RESIST
14. HAND WHEEL C.S. FABRICATED
15. BELLOW AISI-321/316Ti/316L
16. TOP COLLAR AISI-316
17. BOTTOM COLLAR AISI-316
18. STEM NUT AISI-304/316
19. BEARING STD

 Dimensions: 

Valve sizes (inch) 15 20 25 40 50 65 80 100 150 200 250 300 350 400
FLANGE DIA. 150# 89 98 108 127 152 178 191 229 279 343 406 483 533 597
300# 92 118 124 156 165 191 210 254 318 381 445 521 584 648
RAISED FACE DIA. 150# 35 43 51 73 92 105 127 157 216 270 324 381 413 470
300# 35 43 51 73 92 105 127 157 216 270 324 382 413 470
FLANGE PCD. 150# 60 70 79 98 121 140 152 191 241 298 362 432 476 540
300# 67 83 89 114 127 149 168 200 270 330 387 451 514 572
FLANGE THK.. 150# 11 13 14 18 19 22 24 24 25 29 30 32 35 67
300# 14 16 18 21 22 25 29 32 37 41 48 51 54 57
RAISED FACE THK 150# 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 16 1,6 1,6
300# 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 16 1,6 1,6
No. OF HOLES/DIA. 150# 4/16 4/16 4/16 4/16 4/19 4/19 4/19 8/19 8/22 8/22 12/25 12/25 12/29 16/29
300# 4/16 4/19 4/19 4/22 8/19 8/22 8/22 8/22 12/22 12/25 16/29 16/32 20/32 20/32

Test Pressure

 

Test Pressure 150# 300#
Body (Hyd) 32 kg/cm2 76 kg/cm2
Seat  (Hyd) 25 kg/cm2 55 kg/cm2
Seat  (Air) 07 kg/cm2 07 kg/cm2

 

 

bsgbv-y-type-model-300x240

“ Y – Type ” Bellow Seal Globe Valve

Technical Data

  • Valve Designed to BS-1873
  • Valve Tested to API – 598/BS – 5146
  • Flanged Ends as per ANSI-B-16.5
  • Face to Face as per ANSI – B-16.10

Accessories

  • Pneumatic Actuators
  • Electric Actuators
  • Floor Columns
  • By-Pass Piping

Notes

  • Sizes above 250mm has Two Piece Bonnet
  • Optional Stellited Plug & Seat
  • Alternate Bellow Material:-HC-276/MONEL-400/ INCONEL-625

Bill of Material

Sr. No. PARTS MATERIAL
1. BODY A-216 Gr.WCB/A351 Gr.CF8/CF8M
2. GUIDE PLATE AISI-410/304/316
3. PLUG AISI-410/304/316
4. STEM NUT AISI-410/304/316
5. BELLOW                  316Ti
6. GASKET SPW.SS-304 + PTFE/GRAFOIL
7. BONNET A-216 Gr.WCB / A351 Gr.CF8/CF8M
8. PACKING GRAFOIL/PTFE
9. GLAND BUSH AISI-410/304/316
10. GLAND FLANGE C.S./AISI-304/316
11. STEM AISI-410/304/316
12. EYE BOLT & NUT C.S./AISI-304/316
13. YOKE SLEEVE Ni.RESIST
14. HAND WHEEL C.S. FABRICATED
15. FASTENERS A 193-B7,A194-2H/Gr.B8-Gr.8
16. SEAT RING AISI-304/316
17. BOTTOM COLLAR AISI-316
18. TOP COLLAR AISI-31

 

 Dimensions:

VALVE SIZES (INCH) 15 20 25 40 50 65 80 100 150 200 250 300 350 400
FACE TO FACE 150# 108 118 127 165 203 216 241 292 406 495 622 699 787 914
300# 153 178 203 229 267 292 318 356 445 559 622 711 838 965
FLANGE DIA. 150# 89 98 108 127 152 178 191 229 279 343 406 483 533 597
300# 92 118 124 156 165 191 210 254 318 381 445 521 584 648
RAISED FACE DIA. 150# 35 43 51 73 92 105 127 157 216 270 324 381 413 470
300# 35 43 51 73 92 105 127 157 216 270 324 382 413 470
FLANGE PCD 150# 60 70 79 98 121 140 152 191 241 298 362 432 476 540
300# 67 83 89 114 127 149 168 200 270 330 387 451 514 572
FLANGE THK 150# 11 13 14 18 19 22 24 24 25 29 30 32 35 67
300# 14 16 18 21 22 25 29 32 37 41 48 51 54 57
RAISED FACE THK 150# 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6
300# 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6
No. OF HOLES/DIA. 150# 4/16 4/16 4/16 4/16 4/19 4,19 4,19 8/19 8/22 8/22 12/25 12/25 12/29 16/29
300# 4/16 4/19 4/19 4/22 8/19 8/22 8/22 8/22 12/22 12/25 16/29 16/32 20/32 20/32

Test Pressure

Test Pressure 150# 300#
Body (Hyd) 32 kg/cm2 76 kg/cm2
Seat  (Hyd) 25 kg/cm2 55 kg/cm2
Seat  (Air) 07 kg/cm2 07 kg/cm2

 

 

crysnic-glbe-valves

Bellow Seal Cryogenic Valve

Technical Data

  • Valve Designed to BS-1873
  • Valve Tested to API – 598
  • Flanged Ends as per ANSI – B – 16.5

 Notes

  • Sizes above 250mm has Two Piece Bonnet
  • Optional Stellited Plug & Seat
  • Alternate Bellow Material :HC-276 / INCONEL – 625

Bill Of Material

 

 

 

Sr. No.             PARTS Material Cast Stainless Steel
1. Body ASTM – A 351 Gr.CF8/CF8M
2. Seat Ring ASTM – A 351 Gr. CF8/CF8M
3. Plug ASTM – A 351 Gr. CF8/CF8M
4. Stem AISI – 304/316
5. Gasket SPW.SS – 304 + PTFE
6. Bonnet ASTM – A 351 Gr. CF8/CF8M
7. Fasteners ASTM – A 193 Gr.88/A194 Gr.8
8. Bellow                             316Ti
9. Packing PTFE
10. Gland Bush AISI – 304 / 316
11. Gland Flange AISI – 304 / 316
12. Cross Bolt AISI – 304 / 316
13. Eye Bolt & Nut AISI – 304 / 316
14. Yoke Sleeve Ni.RESIST
15. Hand Wheel C.S. Fabricated
16. Cylinder ASTM –  A 351 Gr.CF8/ CF8M
17. Hand Wheel Nut AISI – 304 / 316
18. Hand Wheel Key AISI – 304 / 316
19. Yoke Nut AISI – 304 / 316
20. Top Collar AISI – 316
21. Middle Collar AISI – 316
22. Bottom Collar AISI – 316

Dimensions:

Class 150

Size – NB(MM) 15 20 25 40 50 65 80 100 150 200 250
Face to Face 108 118 127 165 203 216 241 292 406 495 622
Flange Diameter 89 99 108 127 152 178 191 229 279 343 406
Flange Thickness 11 12 13 16 18 19 21 25 26 30 32
Raised Face Diameter 35 43 51 73 92 105 127 157 216 270 324
Raised Face Thickness 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6
Flange P.C.D 60 70 79 99 121 140 152 191 241 299 362
No. Of Holes/Hole Dia. 4/16 4/16 4/16 4/16 4/19 4/19 4/19 8/19 8/22 8/22 12/25

Class 300 

Size – NB(MM)  15  20   25  40  50  65  80  100  150  200 250
Face to Face 153 178 203 229 267 292 318 356 445 559 622
Flange Diameter 95 118 124 156 165 191 210 254 318 381 445
Flange Thickness 16 17 19 22 24 27 30 33 38 43 49
Raised Face Diameter 35 43 51 73 92 105 127 157 216 270 324
Raised Face Thickness 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6
Flange P.C.D 67 83 89 114 127 149 168 200 270 330 388
No. Of Holes/Hole Dia. 4/16 4/19 4/19 4/22 8/19 8/22 8/22 8/22 12/22 12/25 16/28

Test Pressure

Test Pressure 150# 300#
Body (Hyd) 32 kg/cm2 76 kg/cm2
Seat  (Hyd) 25 kg/cm2 55 kg/cm2
Seat  (Air) 07 kg/cm2 07 kg/cm2

 

on-off-control-valves-bom-223x300

Bellow Seal “Control Valve”

Technical Data

  • Valve Designed to BS-1873
  • Valve Tested to API – 598/BS – 5146
  • Flanged Ends as per ANSI-B-16.5

 Notes

  • Sizes above 250mm has Two Piece Bonnet
  • Optional Stellited Plug & Seat
  • Alternate Bellow Material :HC-276/MONEL-400/ INCONEL-625

 Bill Of Material

Sr. No.         PARTS                    MATERIAL
1. BODY A-216 Gr.WCB/A351 Gr.CF8/CF8M
2. STEM NUT AISI-410/304/316
3. PLUG AISI-410/304/316
4. STEM AISI-410/304/316
5. GASKET                  316Ti
6. BONNET SPW.SS-304 + PTFE/GRAFOIL
7. FASTENERS A193-B7,A194-2H/Gr.B8-Gr.8
8. CYLINDER A-216 Gr.WCB/351Gr./CF8/CF8M
9. PACKING GRAPHOIL/PTFE
10. GLAND BLUSH AISI-410/304/316
11. GLAND FLANGE C.S./AISI-304/316
12. STUD & NUT C.S./AISI-304/316
13. COUPLING C.S./AISI-304/316
14. SPRING S.T.D
15. BELLOW AISI-316Ti
16. TOP COLLAR AISI-316
17. BOTTOM COLLAR AISI-316
18. ACTUATOR C.S. FABRICATED

 Dimensions:

VALVE SIZES (INCH) 15 20 25 40 50 65 80 100 150 200 250 300 350 400
FACE TO FACE 150# 108 118 127 165 203 216 241 292 406 495 622 699 787 914
300# 153 178 203 229 267 292 318 356 445 559 622 711 838 965
FLANGE DIA. 150# 89 98 108 127 152 178 191 229 279 343 406 483 533 597
300# 92 118 124 156 165 191 210 254 318 381 445 521 584 648
RAISED FACE DIA. 150# 35 43 51 73 92 105 127 157 216 270 324 381 413 470
300# 35 43 51 73 92 105 127 157 216 270 324 382 413 470
FLANGE PCD 150# 60 70 79 98 121 140 152 191 241 298 362 432 476 540
300# 67 83 89 114 127 149 168 200 270 330 387 451 514 572
FLANGE THK 150# 11 13 14 18 19 22 24 24 25 29 30 32 35 67
300# 14 16 18 21 22 25 29 32 37 41 48 51 54 57
RAISED FACE THK 150# 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6
300# 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6
No. OF HOLES/DIA. 150# 4/16 4/16 4/16 4/16 4/19 4,19 4,19 8/19 8/22 8/22 12/25 12/25 12/29 16/29
300# 4/16 4/19 4/19 4/22 8/19 8/22 8/22 8/22 12/22 12/25 16/29 16/32 20/32 20/32

Test Pressure

Test Pressure 150# 300#
Body (Hyd) 32 kg/cm2 76 kg/cm2
Seat  (Hyd) 25 kg/cm2 55 kg/cm2
Seat  (Air) 07 kg/cm2 07 kg/cm2